Multidec - bore micro offers a wide range of standard blade products (diameter 0.5 to

8mm）。 Sharp cutting edge, small fillet radius and polished chip removal groove ensure the best cutting performance. wear-resisting

Damaged and high toughness coated or uncoated cemented carbide materials are used to process all common materials, including those difficult to add

The material of the work.

The tool bar SDA Made of high-quality steel can be installed in a universal clamping device. Manual blade replacement

In general, there is no need to recalibrate the axial and radial positions.

Advantages:

– for inner hole turning in micro areas:

– very high positioning accuracy

– internal coolant supply

– minimum inner diameter 0.5 mm

– sharp cutting edge

– wear resistance according to machining

At the same time, the cemented carbide (uhm 20) has toughness

– coated or uncoated

Strong clamping tool bar provides greater stability and clamping force, which can be applied to special machining, such as multilateral slotting and CBN

Hard turning and assembling tools with PCD, CVD or MCD to achieve a very fine surface finish for non-ferrous metals.

AKR is an integral tool bar. If there are not enough installation positions for the inner hole tool, it can be installed at the outer diameter tool position

Working bore.