The "IC" has a built-in coolant supply

The economical machining of advanced materials requires more accurate control of coolant to blade, which is often used for slitting machine space

Difficult to achieve.

The multidec - ic product line offers a wide selection of built-in coolant supply arbors. Through precise injection position and

High pressure, chip can be quickly and reliably removed from the blade and workpiece. This means a significant increase in tool life and

It has higher process reliability in mass production

Advantages:

– all toolholders have five coolant supply connection possibilities

- the cooling medium has a fixed outlet; therefore, only a small mechanism is needed in front of the cutter bar

– with or without high pressure, the cooling medium is always sprayed precisely to the blade

AK arbor is very suitable for the use of multidec - cut 3000 series blades on turret lathes. On the cutter bar

The offset end has two fixed coolant outlets. The front outside is equipped with G 1 / 8 "thread coolant connection. another

The outer three M5 joints are located at the top, bottom and side of the cutter bar. They are designed according to the characteristics of turret machine tool and can be used

Direct transfer of coolant